CNC drawing machine using E-waste
Components Used
Powered by
L293D DRIVER Shield
× 1This is the motor driver used in my project to control the two-stepper motor and one servo motor.
Scrap DVD Driver stepper motor
× 1for x- axis and y-axis movement
I have created the CNC machine-based drawing tool using Arduino UNO, Scrap DVD Driver stepper motor
for x-axis and y-axis movement, motor driver, etc.
Machine Drawing:
Drawing Jerry
.jpg)
Arduino Logo Drawing
it is an CNC writing and drawing machine. I made this machine by using two scrap DVD stepper motor, Arduino board, s90 servo motor and L293D motor driver shield. The two-stepper motor is for moving x and y- axis. The servo motor is used to move the pen up and down.it is a simple Panora graphic pantograph used in this project. We can draw any images by simply converting the image into g-code with the help of Inkscape software and we can feed it into the controller by using the processing3 software.
Credits
Built by 1 contributor
Comments7
Join the discussion — share a question or tip.
So what have to do or what changes have to do in it
No need to change anything, build the machine as per my YouTube instruction and it can do anything (both writing and reading).
I want to create same but for writing and drawing both
Can you do homework OR assignments with this??
yes
I want to build similar project
sure follow my instructions. if you have any questions kindly comment here